Clamps, Inc.
5960 American Road East, Toledo, OH 43612
Phone 800-837-0141• 419-729-2141
Fax 419-729-5776
E-mail: info@clampsinc.com

UFDO Series

Heavy Duty Double Edge
(Open End)
W/Flat U-Bolt

This double edge open end clamp provides superior strength and sealabilty. The UFDO is a very strong alternative to our SD-Series when the closure clips are not required for the intended application. This particular clamp utilizes a flat U-bolt instead of round for applications where space is at a minimum.
The UFDO-Series is available in a variety of sizes, materials and finishes.
*See chart below for sizing, material and finishes

UFDO Series Part Dimensions (For Reference Only)
Size Part#  A B C D E F G H GA Wt.
2.00" UFDO200 3.25 2.50 3.72 1.50 2.17 0.31 1.42 .640 11ga 0.41
2.25" UFDO225 3.50 2.75 4.00 1.50 2.42 0.32 1.55 .640 11ga 0.46
2.50" UFDO250 3.75 3.06 3.91 1.50 2.67 0.33 1.68 .640 11ga 0.50
2.75" UFDO275 4.13 3.25 4.62 1.50 2.92 0.32 1.79 .820 11ga 0.57
3.00" UFDO300 4.38 3.50 4.82 1.50 3.17 0.30 1.90 .820 11ga 0.63
3.50" UFDO350 4.88 4.00 5.23 1.50 3.67 0.56 2.40 .820 11ga 0.82
4.00" UFDO400 5.38 4.50 6.18 1.75 4.17 0.53 2.50 .830 11ga 0.91
5.00" UFDO500 6.37 5.50 7.06 1.75 5.17 0.53 3.12 .830 11ga 1.13
6.00" UFDO600 7.75 6.50 7.90 1.50 6.17 0.58 3.68 1.00 11ga 1.35

Material (Complete Clamp):
U-Bolt -C1018 - 3/8-16 UNC-2A Threads
Saddle - 1008-H.R.P.O.
Nuts - Serrated Flanged

Optional Material:
304 Stainless Steel

Optional Finishes: *Other Finishes May Be Available Upon Request.
Clear Zinc - Yellow Zinc - Chrome
Black Paint - Black Zinc
Tolerances:
Standard Packs:

*We reserve the right to change specifications and/or designs without prior notice or obligation

See Our General Tolerance Requirements For U-Bolts 
Other packs may be available upon request

We can do custom labeling and barcoding!