UFD Series
Heavy
Duty Double Edge
(Closed End)
W/Flat U-Bolt
This double edge closed end clamp provides maximum strength
by restricting the saddle from expanding by either welding a clip on the open
ends or by an exclusive Clamps, Inc. design of rolling a tab over. Clamps,
Inc. provides the tab over feature in our most popular 4” and 5”
saddles which eliminates the possibility of having a clip come off and jeopardize
the integrity of the clamp. This particular clamp utilizes a flat U-bolt instead
of round for applications where space is at a minimum.
The UFD-Series is available in a variety of sizes, material and finishes.
*See chart below for sizing, material and finishes
| UFD Series Part Dimensions (For Reference Only) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Part# | A | B | C | D | E | F | G | H | GA | Wt. |
| 3.00" | UFD300 | 4.38 | 3.50 | 4.82 | 1.50 | 3.17 | 0.30 | 1.90 | .820 | 11ga | 0.71 |
| 3.50" | UFD350 | 4.88 | 4.00 | 5.23 | 1.50 | 3.67 | 0.56 | 2.40 | .820 | 11ga | 0.89 |
| 4.00" | UFD400 | 5.38 | 4.50 | 6.18 | 1.75 | 4.17 | 0.53 | 2.50 | .830 | 11ga | 0.98 |
| 4.50" | UFD450 | 6.25 | 5.00 | 6.50 | 1.50 | 4.17 | 0.72 | 3.02 | .830 | 11ga | 1.18 |
| 5.00" | UFD500 | 6.37 | 5.50 | 7.06 | 1.75 | 5.17 | 0.53 | 3.12 | .830 | 11ga | 1.22 |
| 5.50" | UFD550 | 7.25 | 6.00 | 7.43 | 1.50 | 5.67 | 0.58 | 3.37 | 1.03 | 11ga | 1.36 |
| 6.00" | UFD600 | 7.75 | 6.50 | 7.90 | 1.50 | 6.17 | 0.58 | 3.68 | 1.00 | 11ga | 1.50 |
Material
(Complete Clamp):
U-Bolt -C1018
- 3/8-16 UNC-2A Threads
Saddle - 1008-H.R.P.O.
Nuts - Serrated Flanged
*We reserve the right to change specifications and/or designs without prior notice or obligation
We can do custom labeling and barcoding!
